Kevin Jackson Company

kevinjackson — Mon, 29 Mar 2010 19:40:20 +0000

All the balusters have been re installed. The mitred returns complete the new steps, and the new scotia moldings provide a crisp accent. The steps have been protected with paper and plywood for the remainder of the construction process. As the project winds down, the wood will be stained to a consistent hue and the risers and skirts will be painted. Another 19th century stair has been revived, and it stands both as a testament to the care practiced by its’ original makers and the quality of the materials available to them!

The finished balcony

kevinjackson — Mon, 29 Mar 2010 19:31:49 +0000

The balcony awaits staining and finishing.

kevinjackson — Mon, 29 Mar 2010 18:33:14 +0000

The new newel and rail restore the stair to its’ original configuration and appearence c.1868

The New Parts Are Installed

kevinjackson — Mon, 29 Mar 2010 18:30:03 +0000

The new steps are fit, cut to final size, bullnosed, and then installed. The steps are sealed top and bottom and then bedded in adhesive to prevent squeaks.

The new parts are made back at the shop

kevinjackson — Mon, 29 Mar 2010 18:25:09 +0000

The matching newel and 24 balusters are made back at the shop and prepared for installation.

Installing new risers and skirts

kevinjackson — Mon, 29 Mar 2010 18:21:30 +0000

We install new poplar risers with a dado along the bottom edge to receive the tongue on the new tread. The new skirts are also tongued into the risers. The tongues and dados allow the wood to move seasonally without exposing gaps. They also help the structure function as a single piece.

Parts are removed, cleaned, and cataloged

kevinjackson — Mon, 29 Mar 2010 18:13:01 +0000

Tread returns and existing walnut balusters are removed and sent to the paint stripper. The well stringer turns out to be Chestnut! We clean it and repair it. The clients choose Ipé for the new tread material. The old treads are removed and saved as patterns for the new glue-ups.

kevinjackson — Mon, 29 Mar 2010 18:04:05 +0000

Existing stair framing is doubled up and reattached to the brick party wall with masonry anchors

kevinjackson — Mon, 29 Mar 2010 17:58:03 +0000

Steel brackets are fabricated and installed to reconnect the stairframing to the third floor framing.

kevinjackson — Mon, 29 Mar 2010 17:52:33 +0000

A strap and a come along pull the existing top newel back up to where it belongs.